AQUABLAST® surface cleaners
Cleaning, decoating and removing markings on surfaces using high-pressure water
Aquablast® surface cleaners utilize the full potential of high-pressure water for efficient, effective and gentle surface processing. Easy handling and outstanding cleaning performance mean Aquablast® surface cleaners are the perfect solution for a range of applications. Operation is possible on all substrates.
AQUABLAST® surface cleaner
Easy handling and outstanding cleaning performance mean Aquablast® surface cleaners are the perfect solution for a range of applications.
Applications
Cleaning, decoating, removing material and markings, and roughening
The Aquablast® can be used in numerous applications on every substrate. Different results are achieved here depending on the pressure and flow rate. Applications range from thorough surface cleaning all the way through to the targeted removal of material.
Countless different applications
- Cleaning of gratings
- Floor cleaning
- Decoating and removal of paint, rust, etc.
- Cleaning of fuel, oil and grease deposits
- Removal of coatings, mastic residue, concrete laitance, adhesion inhibitors, etc.
- Roughening of concrete and asphalt surfaces
AQUABLAST® models
As varied as your requirements
Aquablast® surface cleaners are as varied as your requirements
AQUABLAST® FR 1500
- Rotary spray bar driven by recoil force
- Rotary connection with wear-resistant labyrinth seal
- Pressure control either via mechanical bypass valve or electric 4-pin system; special controls available on request
- Pressure control via two-hand activation
- Four-wheel design
- With optional wear protection
Working width: 15.75 inch [400 mm]
Operating pressure: up to 22k psi [1500 bar]
Flow rate: 40 gpm [150 l/min]
Speed: 1000 rpm
Weight: ~ 198 lbs [~ 90 kg]
AQUABLAST® FR 3000
- Rotary spray bar driven by recoil force
- Rotary connection with wear-resistant labyrinth seal
- Pressure control either via mechanical bypass valve or electric 4-pin system; special controls available on request
- Pressure control via two-hand activation
- Four-wheel design
- With optional wear protection
Working width: 8.46 inch [215 mm]
Operating pressure: up to 43k psi [3000 bar]
Flow rate: 10 gpm [40 l/min]
Speed: 3000 rpm
Weight: ~ 167.5 lbs [~ 76 kg]
AQUABLAST® FR 3000 HD
- Rotary spray bar driven by recoil force
- Height-adjustable rotary spray bar
- Pressure control either via mechanical bypass valve or electric 4-pin system; special controls available on request
- Pressure control via two-hand activation
- All-steel chassis, meaning the Aquablast® can be cleaned using high-pressure water
Working width: 10.83 inch [275 mm]
Operating pressure: up to 43k psi [3000 bar]
Flow rate: 10 gpm [40 l/min]
Speed: 3000 rpm
Weight: ~ 209 lbs [~ 95 kg]
Cleaning and vacuuming in a single system
AQUABLAST® Plus
Direct suction of the removed waste and jet water
More on AQUABLAST®
AQUABLAST® Basic / Basic E
The handheld floor cleaners are available as mechanical or electrical version and convince by the ergonomic and high-performance cleaning of different surfaces.
AQUABLAST® Plus
Aquablast® Plus are carrier devices with spray bars, which clean surfaces with high pressure water and suck off removed substances simultaneously.
AQUABLAST® Line
The Aquablast® Line is a device for carrier systems and is suitable for cleaning and decoating vertical or vertically inclined surfaces.
AQUABLAST® Drive
Cleaning large surfaces quickly and easily - this is what distinguishes the Aquablast® Drive. The driver-controlled cabin vehicle is versatile and effective.
Hammelmann app
Keep up to date
© Hammelmann Corporation 2024, all rights reserved
