Aquablast® Plus

Aquablast® Plus

Surface cleaning with vacuuming

 
 
Aquablast® Plus

Aquablast® Plus

The removed waste and jet water are immediately vacuumed away to a combined vacuum/filter unit, where they are separated and sent on for further disposal.

Direct suction allows the use of high-pressure water in machine halls without halting production, in multistory buildings and on roads while traffic is flowing.

Ongoing work can continue and unnecessary costs as a result of standstills and production downtimes are prevented.
 
 
 

Applications

Cleaning and vacuuming in a single system means a lot of time and effort can be saved

Thanks to direct suction, subsequent extra work, drying times and waiting times are kept to a minimum. Contamination of the surrounding area by water spray, mist and removed material is noticeably reduced. There are no additional set-up costs and complex preparation of the work area is not necessary.
 
 

Countless different applications

  • Removal of surface coatings, paint and rust on metal surfaces, e.g. ship hulls and storage tanks
  • Cleaning of storage spaces, floors, machine halls and facades
  • Roughening of concrete and asphalt surfaces
  • Removal of markings on roads, parking and storage spaces in production halls

 
 
 
 

Aquablast® Plus models

Numerous applications

Maximum flexibility

 
 
Aquablast® Plus FRV 1000

Aquablast® Plus FRV 1000

 
 

Working width: 19.68 inch [500 mm]

Operating pressure: up to 14k psi [1000 bar]

Flow rate: up to 42 gpm [160 l/min]

Speed: 1500 rpm

Aquablast® Plus FRV 3000

Aquablast® Plus FRV 3000

 
 

Working width: 8.46 inch [215 mm]

Operating pressure: up to 43k psi [3000 bar]

Flow rate: up to 10 gpm [40 l/min]

Speed: 3000 rpm

Aquablast® Plus FRWV 3000

Aquablast® Plus FRWV 3000

 
 

Working width: 5.5 inch [140 mm]

Operating pressure: up to 43k psi [3000 bar]

Flow rate: up to 5 gpm [19 l/min]

Speed: 2500 rpm

 
 
 

Aquablast® Plus as attachment

 
 
Aquablast® Plus attachment

Sample image

The Aquablast® Plus cleaning and vacuuming system can be configured as an attachment for various product solutions.

 
 

Available working widths:

10.78 - 39.37 inch [274 - 1000 mm]

 
 

Typical applications:

Driver-controlled vehicle with cabin for cleaning large surfaces:

 
 

Cleaning devices for removing paint from ships:

 
 
 

Vacuum system

Vacuum system for suctioning off and pre-filtering the high-pressure wastewater

Dual-chamber system

 
 
Aquablast® Plus vacuum system

Vacuum system for operating Aquablast® Plus devices. The removed waste and jet water are separated in the system and sent on for further disposal.

 
 

Vessel volumes:

2 x 60.75 gallons [2 x 230 l]

Required power:

7.37 hp [5,5 kW]

Vacuum:

2.9 psi [200 mbar]

Suction power:

200 m3/h

 
 
 
 

More on Aquablast®

Aquablast®

Aquablast®

Aquablast® are carriers with spray bars that clean, demarcate and decoat surfaces with high-pressure water.

 
 
Aquablast® Basic

Aquablast® Basic

Hand-held surface cleaner with optional Aquablast® Plus direct suction, for universal use.

 
 
Aquablast® Line

Aquablast® Line

Device mounted on a carrier system for cleaning and decoating vertical or vertically inclined surfaces.

 
 
Aquablast® Drive

Aquablast® Drive

Driver-controlled cab vehicle with an Aquablast® Plus cleaning and suction system.

 
 
 
This website uses cookies. By using the website, you consent to the use of cookies. Data protection