Aquablast®

Aquablast®

Cleaning, decoating and removing markings on surfaces using high-pressure water

Aquablast® surface cleaners utilize the full potential of high-pressure water for efficient, effective and gentle surface processing. Easy handling and outstanding cleaning performance mean Aquablast® surface cleaners are the perfect solution for a range of applications. Operation is possible on all substrates.

 
 

Aquablast® surface cleaner

Easy handling and outstanding cleaning performance mean Aquablast® surface cleaners are the perfect solution for a range of applications.

 
 
 

Applications

Cleaning, decoating, removing material and markings, and roughening

The Aquablast® can be used in numerous applications on every substrate. Different results are achieved here depending on the pressure and flow rate. Applications range from thorough surface cleaning all the way through to the targeted removal of material.

 
 

Countless different applications

  • Cleaning of gratings 
  • Floor cleaning 
  • Decoating and removal of paint, rust, etc.
  • Cleaning of fuel, oil and grease deposits 
  • Removal of coatings, mastic residue, concrete laitance, adhesion inhibitors, etc. 
  • Roughening of concrete and asphalt surfaces

 
 
 
 

Aquablast® models

As varied as your requirements

Aquablast® surface cleaners are as varied as your requirements

 
 
Aquablast® FR 1500 surface cleaner

Aquablast® FR 1500

 
 

  • Rotary spray bar driven by recoil force
  • Rotary connection with wear-resistant labyrinth seal
  • Pressure control either via mechanical bypass valve or electric 4-pin system; special controls available on request
  • Pressure control via two-hand activation
  • Four-wheel design
  • With optional wear protection

 
 

Working width: 400 mm

Operating pressure: up to 1500 bar

Flow rate: 150 l/min

Speed: 1000 rpm

Weight: ~ 90 kg

Aquablast® FR 3000 surface cleaner

Aquablast® FR 3000

 
 

  • Rotary spray bar driven by recoil force
  • Rotary connection with wear-resistant labyrinth seal
  • Pressure control either via mechanical bypass valve or electric 4-pin system; special controls available on request 
  • Pressure control via two-hand activation
  • Four-wheel design
  • With optional wear protection

 
 

Working width: 215 mm

Operating pressure: up to 3000 bar

Flow rate: 40 l/min

Speed: 3000 rpm

Weight: ~ 76 kg

Aquablast® FR 3000 HD surface cleaner

Aquablast® FR 3000 HD

 
 

  • Rotary spray bar driven by recoil force
  • Height-adjustable rotary spray bar
  • Pressure control either via mechanical bypass valve or electric 4-pin system; special controls available on request
  • Pressure control via two-hand activation
  • All-steel chassis, meaning the Aquablast® can be cleaned using high-pressure water

 
 

Working width: 275 mm

Operating pressure: up to 3000 bar

Flow rate: 40 l/min

Speed: 3000 rpm

Weight: ~ 95 kg

 
 
 

Cleaning and vacuuming in a single system

Aquablast® Plus

Direct suction of the removed waste and jet water

 
 

More on Aquablast®

Aquablast® Basic

Aquablast® Basic

Hand-held surface cleaner with optional Aquablast® Plus direct suction, for universal use.

 
 
Aquablast® Plus

Aquablast® Plus

Carrier units with spray bars that clean surfaces with high-pressure water and suck off the removed substances and the jet water simultaneously.

 
 
Aquablast® Line

Aquablast® Line

Device mounted on a carrier system for cleaning and decoating vertical or vertically inclined surfaces.

 
 
Aquablast® Drive

Aquablast® Drive

Driver-controlled cab vehicle with an Aquablast® Plus cleaning and suction system.

 
 
 
This website uses cookies. By using the website, you consent to the use of cookies. Data protection