SPIDERJET® surface preparation devices

SPIDERJET® surface preparation devices

Whether cleaning, paint stripping or decoating large steel structures, such as ships, tanks or vessels - the SPIDERJET® surface preparation equipment delivers fast and clean results and, thanks to compact variants, can be maneuvered through even the narrowest area. Minimal set-up times ensure rapid deployment, and the use of high-pressure water without additives or chemicals protects the environment. The high area output and semi-automatic operation reduce working time and costs while increasing work safety.

 
 

Overview SPIDERJET® models

SPIDERJET® M

The SPIDERJET® M is attached to the work surface by permanent magnets and an additional vacuum system that can also suction off the removed waste material and wastewater.

SPIDERJET® M Edge

The SPIDERJET® M Edge is attached to the work surface with permanent magnets and, thanks to its small build, is ideal for cleaning particularly close to the edge of the coated area. The vacuum system immediately retrieves all waste water and removed solids and allows for further processing.

SPIDERJET® M Compact

With its particularly narrow design and sophisticated concept, the SPIDERJET® M Compact offers unimagined advantages. It is powerful and offers a very constant removal pattern across the entire working width of 225 mm - even for the narrowest surfaces.

SPIDERJET® V

The SPIDERJET® V is held on the work surface by a vacuum. At the same time, this vacuum also suctions off the removed waste material and wastewater.

 
 
 

Compare our SPIDERJET® models

SPIDERJET® M

Permanent magnets
Vacuum system
 
 

Working width:

374 mm

Operating pressure:

up to 3000 bar

Flow rate:

up to 50 l/min.

Weight:

113 kg

Operating speed:

0-7 m/min.

SPIDERJET® M Edge

Permanent magnets
Vacuum system
 
 

Working width:

374 mm

Operating pressure:

up to 3000 bar

Flow rate:

up to 50 l/min.

Weight:

105 kg

Operating speed:

0-7 m/min.

SPIDERJET® M Compact

Permanetmagnete
Vakuumsystem
 
 

Working width:

225 mm

Operating pressure:

up to 3000 bar

Flow rate:

up to 50 l/min.

Weight:

78 kg

Operating speed:

0-7 m/min.

SPIDERJET® V

Vacuum system
 
 

Working width:

374 mm

Operating pressure:

up to 3000 bar

Flow rate:

up to 50 l/min.

Weight:

95 kg

Operating speed:

0-7 m/min.

 
 
 

AQUABLAST® Plus cleaning and vacuuming system

In combination with the direct, integrated AQUABLAST® Plus vacuum system, SPIDERJET® devices ensure environmentally friendly derusting, plus the removal of old surface coatings and accumulated waste and wastewater.

 
 
 
 
The specially developed nozzle layout ensures that the high-pressure water is distributed evenly across the entire working width
 
 
Hydraulic drive for constant speeds, infinitely variable from 100 to 2500 rpm
 
 
Oil and water kept completely separate – contamination of the hydraulic oil as a result of significant pressure losses not possible
 
 
Cleaning and vacuuming integrated in a single system
 
 
 

Vacuum systems

Two vacuum systems are available for the Spiderjet® V and Spiderjet® M:

 
 
Vacuum system

Vacuum system 1900

1900 m³/h @ 500 mbar vacuum

More details

Maximum vacuum: 
500 mbar

Vacuum generator: 
Roots-type blower

Electric motor: 
45 kW

Length:
2335 mm 

Width:
1500 mm 

Height: 
2380 mm

 
 

Suction hopper:

Contents: 3 m³
Length: 2350 mm
Width: 2350 mm
Height: 4200 mm

Vacuum system

Vacuum system 660

660 m³/h @ 500 mbar vacuum

More details

Maximum vacuum: 
500 mbar

Vacuum generator: 
Roots-type blower

Electric motor: 
15 kW

Length:
2175 mm 

Width:
970 mm 

Height:
2180 mm

 
 

Suction hopper:

Contents: 3 m³
Length: 2350 mm
Width: 2350 mm
Height: 4200 mm

Suction hopper

Suction hopper

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Find out more about our product solutions for the ship industry

DOCKBOY

DOCKBOY

The DOCKBOY is a remote controlled cleaning vehicle for the ship industry. With working heights from 0 - 13 m, it is ideal for working on the hull bottom.

 
 
DOCKMATE

DOCKMATE

The DOCKMATE is a remote controlled cleaning vehicle with a separate high-pressure unit. With a working height of 32 m, it is designed for work on the hull.

 
 
AQUABLAST® Line

AQUABLAST® Line

The AQUABLAST® Line is a device for carrier systems and is suitable for cleaning and decoating vertical or vertically inclined surfaces.

 
 
All information on the ship industry

All information on the ship industry

Count on unbeatable efficiency and flexibility. Hammelmann offers a range of systems specifically designed to meet the challenges of ship cleaning.

 
 
 
 

This website uses cookies

We use cookies to enable a smooth and user-friendly visit.
In addition to essential cookies, needed for basic functionality, we use third-party cookies (Google Fonts, YouTube) and tracking tools (Google Analytics) for analysis purposes. If you do not accept the use of cookies, we cannot guarantee unrestricted of all features of this website. You can find more information about our use of cookies and how you can manage your cookie settings in our data protection information.