For any surface and any substrate
Jetboy S is an ergonomic water tool with an adjustable handle and a variable working height for a secure standing position when working overhead.
You can adapt Jetboy L to a wide range of different work positions. For cleaning ceilings, floors, and corners.
Jetboy XL makes possible virtually effortless work. This results in a significantly greater area performance.
Jetboy S has been specially designed for overhead working.
An ergonomic water tool with an adjustable handle and a variable working height for a secure standing position when working overhead.
High safety standard due to internal high-pressure hose that is encapsulated by means of a guide tube
There is no risk to the operator if the high-pressure hose fails
The high-pressure hose is mounted on pivotable bearings in the guide tube
Can be used for a recoil of a maximum of 350 N (no body support)
Handle made of shock-resistant plastic with a second handle
Hammelmann special trigger for approximately 80 % less force required and less physical load
Built-in Reed switch for 24 VDC control signals; can also be used in intrinsically safe Ex (i) electric circuits.
Safety lever to prevent accidental switching to high-pressure
You can use Jetboy S for manual high-pressure blasting work (washing, cleaning, and removing) at up to 46,400 psi [3200 bar] on substructures and ceilings with the jet recoil being directed to the floor by means of a support.
46k psi [3200 bar]; in accordance with the high-pressure hose that is used
8 gpm [30 l/min]
(at delta p 72.5 psi [5 bar])
M 14x1.5 LH, external
57.5 inch [1462 mm]
15 lbs [6.8 kg]
(with high-pressure hose)
M 14 x 1.5 LH
82.6 inch [2100 mm]
110.2 inch [2800 mm]
You can adapt Jetboy L to a wide range of different work situations.
For working with single or rotor jets and Aquablast® surface cleaners.
Adapt your Jetboy optimally according to your personal situation