Jetboy water tools

JETBOY working tools

Virtually effortless work thanks to mechanical assistance

For any surface and any substrate

 
 

Overview

Jetboy S

Jetboy S

 
 

 
 

Jetboy S is an ergonomic water tool with an adjustable handle and a variable working height for a secure standing position when working overhead.

Download the product sheet

 
 
Jetboy L

Jetboy L

 
 

 
 

You can adapt Jetboy L to a wide range of different work positions. For cleaning ceilings, floors, and corners.

 
 
Jetboy XL

Jetboy XL

 
 

 
 

Jetboy XL makes possible virtually effortless work. This results in a significantly greater area performance.

Download the product sheet

 
 
 
 
 
 
 

More information

Jetboy S

 
 

Ergonomic for overhead working

Jetboy S has been specially designed for overhead working.

 
 
Jetboy S

An ergonomic water tool with an adjustable handle and a variable working height for a secure standing position when working overhead.

Due to the improved ergonomics of the Jetboy S, you can work overhead for longer periods of time and with greater concentration – this increases safety and economy at the same time.

The modular structure of the Jetboy S allows you to change the working height easily without using tools and to adjust the set-up to the operator's working posture. A water tool and a high-pressure hose are available as an option.

 
 
 

Product benefits at a glance

High safety standard due to internal high-pressure hose that is encapsulated by means of a guide tube

There is no risk to the operator if the high-pressure hose fails

The high-pressure hose is mounted on pivotable bearings in the guide tube

Can be used for a recoil of a maximum of 350 N (no body support)

Handle made of shock-resistant plastic with a second handle

Hammelmann special trigger for approximately 80% less force required and less physical load

Built-in Reed switch for 24 VDC control signals; can also be used in intrinsically safe Ex (i) electric circuits

Safety lever to prevent accidental switching to high-pressure

 
 
 

Areas of application

 

You can use Jetboy S for manual high-pressure blasting work (washing, cleaning, and removing) at up to 3200 bar on substructures and ceilings with the jet recoil being directed to the floor by means of a support.

 
 

Technical data

Max. operating pressure

3200 bar; in accordance with the high-pressure hose that is used

Max. flow rate

30 l/min 
(at delta p 5 bar)

Hose connection

M 14 x 1,5 LH

Overall length

1462 mm

Weight

6.8 kg (with high-pressure hose)

Connection thread for the high-pressure tool

M 14 x 1,5 LH

 

Min. working height

2100 mm

Max. working height

2800 mm

 

Jetboy L

 
 

Suitable for any situation

You can adapt Jetboy L to a wide range of different work situations.

 
 

Mechanical assistance

For working with single or rotor jets and Aquablast® surface cleaners.

  • Ceilings, supports (bridges, parking lots, etc.) 
  • Floor surfaces (removing expansion joints and markings)
  • Safe blasting of edges and corners

 

Jetboy XL

 
 

Ergonomic high-pressure water tool mount with adjustable operating handle and variable working height for a safe stand during high-pressure work.

The simple, tool-free adjustment of the working height enables a quick adjustment of the work position for each respective operator and allows perfect adaption to the working conditions. High-pressure water tools and high-pressure hoses are optionally available.

 
 

Great ergonomics and safety

High absorption of recoil forces

Optimal adaptation to individual operator and work environment

 
 
 

Product benefits at a glance

Recoil compensation through counterweight in the water pipe ensures ergonomic work

Adjustable drawbar for more stability

Height-adjustable fixture for the spray gun offers a wide variety of working positions

Water tanks serve as a simple leveling device

Max. maneuverability thanks to free guidance over three axes

Easy to transport on site

Easy set-up

Compatible with optional high-pressure spray gun SP 3200

 
 
 

Fields of application

 

The Jetboy XL is suitable for high-pressure blasting work (washing, cleaning and removal) up to 3200 bar. The jet recoil
of the water tool is compensated for using a safe stand and counterweights and makes changing the distance
and rotation equally convenient. Hoses and water tools are optionally available.

 
 

Technical data Jetboy XL

Total length

1100 mm x 
1287 mm x 
1497 mm

otal weight including water filling and ballast tanks

192 kg

Connection thread for the high-pressure tool

M 14 x 1,5 LH

Min. working height

1287 mm

Max. working height

2000 mm

 
 
 

Technical details for optional high-pressure water lance

Max. operation pressure

3200 bar, or according to the high pressure hose used

Max. flow rate

30 l/min

Hose connection

M 14 x 1,5 LH

 
 
This website uses cookies. By using the website, you consent to the use of cookies. Data protection