Based on the principle of proven tank cleaning units
3D pipe cleaners work in two axes based on the principle of the tank cleaning units. When combined with a guide sled, the units can be used for pipe cleaning. They move forward in the pipe automatically thanks to an additional kick plate. Particularly hard deposits and incrustations are removed here.
Aquamat-Type
Nozzle arm:
0.7 inch [18 mm]
“S” arm, 2 nozzles
Operating pressure:
max. 22k psi [1500 bar]
Flow rate:
79 gpm [300 l/min]
Min. pipe Ø:
7.875 inch [200 mm]
Aquamat-Type
Nozzle arm:
1.37 inch [35 mm]
“S” arm, 2 nozzles
Operating pressure:
max. 23k psi [1600 bar]
Flow rate:
66 gpm [250 l/min]
Min. pipe Ø:
12.5 inch [320 mm]
Aquamat-Type
Nozzle arm:
0.51 inch [13 mm]
“S” arm, 2 nozzles
Operating pressure:
max. 23k psi [1600 bar]
Flow rate:
132 gpm [500 l/min]
Min. pipe Ø:
18.5 inch [470 mm]
Guide sled for enabling Aquamat tank cleaning units to be used for pipe cleaning. The tank cleaning unit is mounted in the center of the guide sled. The pulling device is fastened to the fitted eyelet. A kick plate for self-propulsion forwards is optionally available.