100% waste water becomes 99% clear water
100% waste water becomes 99% clear water
Discover our systems for water treatment
100% waste water becomes 99% clear water
100% waste water becomes 99% clear water
Discover our systems for water treatment
1

Mobile Wastewater Treatment and Sludge Dewatering System

Flexible and resource-saving recycling of water

 
 
 
 
Complete solution directly on site
 
 
 
 
Largely water self-sufficient operation
 
 
 
 
Efficient sludge separation
 
 
 
 
 
Low logistics / disposal costs
 
 
 
 
Conservation of resources
 
 
 
 
Compact sludge management
 
 
 
 
 

Environmentally friendly and water efficient

 
 
 

Mobile Wastewater Treatment

The concept of our mobile Wastewater Treatment System

The mobile wastewater treatment system is based on a chemically-physically method, that is able to filter particles out of the wastewater which arise in the operating process. To do so, floccing agents are added to the polluted wastewater which results in a chemical precipitation and is followed by flocculation. Those phases are split through sedimentation. The sludge is pumped to the outside. The pre-cleared water is also pumped outside by passing various fine filtration units at a final particle size of less than 1μm. After this treatment it can be re-used or discharged as clear water. The plant operates as an interface independent from the high-pressure system between the collected wastewater and the treated clear water.

 
 
 
 

Versatile and flexible application options

The options to use the mobile wastewater treatment system are broad. In many industries when working with water as a working fluid, the water can not be re-used after one cycle, as it becomes too polluted during the working process. Especially with high-pressure applications, this is no longer possible due to the required water quality. But also in areas with lower pressure and as washing water, only clear water can be used. The water quality achieved when using the mobile water treatment enables it to be reused and has a positive effect on the profitability and ecological balance of the entire process.

 
 
Concrete preparation

Concrete preparation

Dockyards

Dockyards

Tank cleaning

Tank cleaning

 
 
 

The compact construction allows 100% mobility

It only takes few steps to get the fullly automatic wastewater treatment system up and running, on every construction site, in all climate zones around the world. Even wastewater that is difficult to filter can be treated in a single operation. About 5-10% of the wastewater is eliminated as liquid sludge and 90-95% is fed back into the work process with a pure water quality of less than 1 μm particle size and made available to the high-pressure pump.

  • The functional sequences of the container filtration system are fully automated
  • The pH-value is monitored permanently and regulated if required
  • The mobile wastewater treatment systems are made in Austria and produced by specialists
 
 
 
 
 

Technical details

20′ LC Container
(insulated)


6 m x 2,4 m x 2,6 m

Weight
(empty)


~ 5000 kg

Flow rate


up to 200 l/min
(infinitely variable)

Filter rate


up to 1 µm
(nominal)

Power supply


400 V, 50 Hz, 16 A

 
 
 

Characteristics

Procedure


chemically - physically

pH value
neutralisation


CO2

Recording


pH-value, turbidity,
flow rate

Control


fully automated

Remote maintenance /- access


3G/4G

 

Mobile Sludge Dewatering

The additional, mobile Sludge Dewatering System

The mobile sludge dewatering is a compact and fully automated solution to thicken up to 12m³/h of liquid sludge and then dispose of it. The system, installed in a 20′ container, separates the solids and residual water from the liquid sludge. The result is a compact sludge in landfillable/incineratable form, which can be easily disposed of using a Big Bag. The plant is an ideal supplement to the mobile wastewater treatment system, in which industrial wastewater, mainly from high-pressure removal, is cleaned in a combined and fully automatic process and separated into reusable clear water and sludge.
 
 
 
 

Versatile and flexible application options

The options to use the mobile wastewater treatment system are broad. In many industries when working with water as a working fluid, the water can not be re-used after one cycle, as it becomes too polluted during the working process. Especially with high-pressure applications, this is no longer possible due to the required water quality. But also in areas with lower pressure and as washing water, only clear water can be used. The water quality achieved when using the mobile water treatment enables it to be reused and has a positive effect on the profitability and ecological balance of the entire process.

 
 
Concrete preparation

Concrete preparation

Dockyards

Dockyards

Tank cleaning

Tank cleaning

 
 
 

When does a sludge dewatering system make sense?

The possible uses of sludge dewatering in combination with the mobile wastewater treatment plant are diverse. The greatest benefit is in applications with large volumes of wastewater and sludge. With the sludge dewatering system it is possible to reduce the liquid sludge by up to 90%. In applications with high levels of pollutant contamination in the wastewater and thus in the sludge, the use of the sludge dewatering system reduces the disposal costs to a minimum.
 
 

Compact system configuration

The mobile sludge dewatering container offers additional space for the storage and transport of various resources (flocculants, additives) and other equipment of the wastewater treatment plant. A holder for the transport-safe storage of an IBC for flocculants is also installed in the container. Equipment required for the operation of the filtration system, such as hoses and pumps, can be safely stored in storage areas.
 
 
 
 
 

Technical details

20‘ LC Container


6 m x 2,4 m x 2,6 m

Weight (empty)


~ 2000 kg

Flow rate


up to 12 m3/h

Power supply


400 V, 50 Hz, 2 kW

 
 
 

Characteristics

Operation


Fully automated

Product


Sludge

Sludge consistency


Compact

Sludge discharge


Big Bag

 
 
 

Versatile and flexible application options

The options to use the mobile wastewater treatment system are broad. In many industries when working with water as a working fluid, the water can not be re-used after one cycle, as it becomes too polluted during the working process. Especially with high-pressure applications, this is no longer possible due to the required water quality. But also in areas with lower pressure and as washing water, only clear water can be used. The water quality achieved when using the mobile water treatment enables it to be reused and has a positive effect on the profitability and ecological balance of the entire process.

 
 
  • Layer by layer removal of various concrete layers
  • Removal of old paint layers from ship walls
  • Manual cleaning of industrial equipment, components, machines, tools, etc.
  • Cleaning of tanks, vessels and containers of various diameters
 
 
 
 
 
Focus: Hydrodemolition
Focus: Dockyards
 
 
 
 
 
 
 
 

Request a call back

 

This website uses cookies

We use cookies to enable a smooth and user-friendly visit.
In addition to essential cookies, needed for basic functionality, we use third-party cookies (Google Fonts, YouTube) and tracking tools (Google Analytics) for analysis purposes. If you do not accept the use of cookies, we cannot guarantee unrestricted of all features of this website. You can find more information about our use of cookies and how you can manage your cookie settings in our data protection information.